MX8 Turns Rust Around

The following pictures from Pacific France shows the restoring power of INOX MX-8 which is industrial grade, extreme pressure, high temperature Lithium complex and P.T.F.E. base grease. It turns rust around and cuts application time since it sticks to the chain underwater. It gives long service life under high loading and shock loading from very low to very high temperature environments. With its shear stability combined with effective rust, oxidation, corrosion inhibitors and tackiness adhesives ensures this grease to be the preferred recommendation for underwater applications. P.T.F.E. - Polytetrafluoroethelene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temeratures thus saving money.

Saved $345 with MX-2 Battery Conditioner

Last August, the very expensive battery in my van ran out of juice and would not crank the engine. I had purchased a small bottle of INOX MX-2 Battery Conditioner several weeks earlier on the recommendation of a friend who had some experience with the product and it was time to see if the stuff really worked. After putting 15 ml ( half an ounce ) in each cell, I put my charger on the battery just long enough to put enough juice in it to get the van started. I then drove the van for about 40 minutes on an errand out of town and when I returned, I stopped at the auto parts store and turned off the engine - I wanted to be ready to replace the battery if the MX-2 hadn't worked. When it started like it had a new battery, I drove away with a smile on my face and the $150 that I was prepared to pay for a new battery still in my pocket. Since then I have put MX-2 in my wife's car that had a 3+ year old battery that was getting weak and in my van's accessories battery (another $150 battery). So in the last 6 months I saved about $375 by using MX-2 battery conditioner in the 3 batteries in my 2 vehicles. As soon as spring comes around I'll be putting MX-2 in my riding mower's battery and feel certain that it will make it through another season or 2 or 3. For less than $30 for all 3 batteries, I have saved having to replace them and $375, a net savings of $345. I'm convinced!

Mike H
Tellico Plains, TN

Golf Course Savings Using INOX

This past year a Florida golf course tested two INOX products to see what value INOX MX-4 Lanox would have to the Club to reduce maintenance and labor and save electricity for battery charging.

Test 1. The club wanted to determine if applying MX-4 Lanox would protect the carts in the same way boaters were seeing benefits to using MX-4. Therefore they decided to test MX-4 on 15 of the 30 cart fleet and do a comparison. They sprayed the fiberglass body, rubber floor mats, plastic drink holders, rubber bumpers and wheel surounds, metal and aluminium wind shield frames, rain curtains and zippers and vinyl bag covers, and seats, then did nothing for a month to see if there was a difference between the two sets of carts. The first thing that happened was the members commented that the club must have bought new carts, the INOX MX-4 Lanox had restored all the surfaces to a 'like brand new' appearance. Second, 30 days later the MX-4 carts still looked brand new, the members still commenting on the 'new' carts, while the 15 untreated carts looked old. The lanolin in the MX-4 waterproofed the carts and even when they were washed off with the hose the Lanox didn't come off or dry out and kept the carts new looking. Now once a month the club reapplies MX-4 on the carts to keep them looking brand new which the members like.

Test 2. The MX-4 Lanox was also tested on the greens mower blades to see if the maintenance guys could clean the mowers less than once every green to prevent the grass clippings from getting on the greens. In the test, they found that they could cut three greens before they had to stop and wash off the mowers. The time to clean before cutting was reduced to 1/3 rd the time.

Test 3. This is the exact quote from the club manager speaking about the value of MX-2 Battery Conditioner. “I have a fleet of 2-3 year old golf carts. I was only getting 18 holes on a charge. After conditioning them with INOX MX-2, the carts are getting 45 holes on one charge and it has cut my recharge time by half!”

The club did not appear to have a second meter on the cart shack, however getting 2 1/2 times the rounds per charge would definitely reduce the cost of electricity for the club . . . possibly as much as $3000 to $4000 a year in savings.

Car Window Unstruck

My friend was telling me about how amazing these INOX products were so I bought a bottle of INOX MX-3 and tried it on my old run about car. The crank windows would not go up and down so I sprayed the handles and down into the window channels in the doors. The next day it was like they were brand new – up and down, up and down with no sticking or anything. INOX works! I bought some more for my friends to try because as I said, this INOX stuff really works!

Charlene H
Tellico Plains, TN

Snow Falls Right Off

We normally don’t have lots of snow in our area of East Tennessee but in a month we’ve had two snows that were eight inches or more. I took my tractor with box blade to clean the 1,500 foot long driveway and every time I pushed the snow, I had to get out with a shovel and remove it from the blade because it stuck. I’d purchased some INOX MX3 which I’d used on sticking sliding glass doors and squeaky windows and decided to spray the blade to see if it would get the snow to slide off. I figured it couldn’t hurt! It didn’t hurt at all, the snow came off the blade every time I pushed it … no more climbing off the tractor! It was great!

Jim S
Coker Creek, TN

P.S. INOX MX-3 or INOX MX-4 would work on snow blowers, and shovels for snow removal as well!

No Rust on My Guns!

I am a hunter and saw your ad for a free sample and was curious about the INOX MX-3 so I ordered it to try. I did all the lubrication as usual but with MX 3 on my guns instead of what I had been using, then I went hunting. Of course, it rained so all the guns were wet most of the weekend. When I get back the first thing I have to do is get all the surface rust off to protect them, NOT with the INOX MX-3. All my guns looked just like they did Friday before I went hunting, no rust at all! Here is my order for more. I am going to give these extra cans to all my hunting buddies and will contact the local gun store . . . we want to have them stock INOX for us.

Thanks

Larry I
Tennessee

Another Door MX-3 Fixed!

It did it again!!! I told earlier how the INOX MX-3 fixed the doors that even the company maintenance people couldn't fix. This time I used the MX-3 on a pocket door that I had already bought all the replacement parts for. I figured I had nothing to lose so sprayed it on. I will be taking the parts back for a refund as it slides as good as new now.

Missy M
Tellico Plains, TN

Welding and Fabrication

Great video http://www.youtube.com/INOXgreen#p/f/12/I5dUJ18eTnk on welding and fabrication using INOX MX 3. I have my maint guy spraying all of our mig welders down, what a great idea. Thanks for sending this.

Mike P.
Chicago , IL

Glue'd Bolts Come Right Off

I just used the INOX MX 3 yesterday, what an amazing product it is. I broke loose bolts that were bulldog glue'd on nearly 10 years ago and rusted completely over. I sprayed on the product and let it settle for 3 hours and came back out and broke the bolts loose and they came right off. I was amazed, you have a great product there.

Alex C.
South Carolina

Saved Time and Money with MX3

I am the maintenance manager for our plant. We produce vinyl siding products that require steam heat. The high pressure steam pipes have continuous heat and cool cycles that seem to fuse the 40 bolt stainless steel and aluminum connection collars together. Every 4 years we have to do maintenance on the steam system and must break loose all these bolt studs. Each time we break off 6 to 8 studs at each connection then have to drill them out to get the collar loose. I sprayed INOX MX 3 on the studs twice over two days and loosened EVERY stud without breaking any of them. It is the first time in the history of the plant that has ever happened. I am a believer, we saved at least $200 in labor that day, plus stopped alot of frustration by my maintenance guys by using INOX MX 3. This product makes my job much easier.

Ron L
Ohio